Patton 4120: Configurazione con FreePBX

Dato che abbiamo impiegato diverso tempo a configurarlo per bene, posto la nostra configurazione funzionante.

Nel nostro caso il Patton risponde su uno solo dei due numeri a nostra disposizione (evidenziato in giallo)

Se volete che risponda su tutte le linee in ingresso sostituite il numero con T2

#----------------------------------------------------------------#
#                                                                #
# SN4120/1BIS2V                                                  #
# R6.3 2013-03-07 H323 SIP                                       #
# 1970-01-02T18:44:50                                            #
#----------------------------------------------------------------#

cli version 3.20
clock local default-offset +00:00
webserver port 80 language en
sntp-client
sntp-client server primary pool.ntp.org port 123 version 4

system

  ic voice 0
    low-bitrate-codec g729

system
  clock-source 1 bri 0 0

profile ppp default

profile call-progress-tone defaultDialtone
  play 1 1000 425 -6

profile call-progress-tone defaultAlertingtone
  play 1 1000 425 -13
  pause 2 4000

profile call-progress-tone defaultBusytone
  play 1 300 425 -7
  pause 2 200

profile call-progress-tone defaultReleasetone
  play 1 300 425 -7
  pause 2 400

profile call-progress-tone defaultCongestiontone
  play 1 300 425 -7
  pause 2 400

profile tone-set default

profile voip default
  codec 1 g711alaw64k rx-length 20 tx-length 20
  codec 2 g711ulaw64k rx-length 20 tx-length 20
  codec 3 g729 rx-length 20 tx-length 20
  fax transmission 1 relay t38-udp

profile pstn default

profile sip default
  no autonomous-transitioning

profile aaa default
  method 1 local
  method 2 none

context ip router

  interface IF_IP_LAN
    ipaddress 10.0.0.150 255.255.255.0
    tcp adjust-mss rx mtu
    tcp adjust-mss tx mtu

context cs switch
  national-prefix 0
  international-prefix 00

  routing-table called-e164 RT_ISDN_TO_SIP_0
    route 0331XXXXXX dest-interface IF_SIP_0 MAPPING_INCOMING_CALLS

  routing-table called-e164 RT_SIP_TO_ISDN_0
    route default dest-interface IF_ISDN_0 CLIP_DISABLED

  mapping-table calling-pi to calling-e164 MAP_REMOVE_BLANK_CALLERID
    map restricted to ""

  mapping-table calling-e164 to calling-e164 MAP_LEADING_ZERO
    map (.%)-(.%)-(.%)-(.%)-(.%) to \1\2\3\4\5
    map (.%)-(.%)-(.%)-(.%) to \1\2\3\4
    map (.%)-(.%)-(.%) to \1\2\3
    map (.%)-(.%) to \1\2

  mapping-table calling-e164 to calling-name MAP_CID_TO_CNAME
    map (.%) to \1

  mapping-table calling-e164 to calling-e164 CALLINGE164
    map 0(.%) to \1

  mapping-table calling-type-of-number to calling-type-of-number CALLINGNUMBERTYPE
    map default to national

  mapping-table calling-numbering-plan to calling-numbering-plan CALLINGNUMBERPLAN
    map default to isdn-telephony

  mapping-table calling-uri to calling-pi CALLINGPIRESTRICTED
    map sip:anonymous@.% to restricted

  complex-function MAPPING_INCOMING_CALLS
    execute 1 MAP_REMOVE_BLANK_CALLERID
    execute 2 MAP_LEADING_ZERO

  complex-function CLIP_ENABLED
    execute 1 CALLINGNUMBERPLAN
    execute 2 CALLINGE164
    execute 3 CALLINGNUMBERTYPE
    execute 4 CALLINGPIRESTRICTED

  complex-function CLIP_DISABLED
    execute 1 CALLINGPIRESTRICTED

  interface isdn IF_ISDN_0
    route call dest-table RT_ISDN_TO_SIP_0
    call-hold disable
    caller-name
    user-side-ringback-tone

  interface sip IF_SIP_0
    bind context sip-gateway GW_SIP_0
    route call dest-table RT_SIP_TO_ISDN_0
    remote 10.0.0.43 5060
    early-connect
    early-disconnect
    address-translation outgoing-call request-uri user-part fix 10000 host-part to-header target-param none
    trust remote

context cs switch
  no shutdown

authentication-service AS_ALL_LINES
  realm 1 3CXPhoneSystem
  username 10000 password Z7wh1f7Ii0qJzcJxEhGKUw== encrypted

location-service LS_10000
  domain 1 10.0.0.43

  identity-group default

    authentication outbound
      authenticate 1 authentication-service AS_ALL_LINES username 10000

  identity 10000

    authentication outbound
      authenticate 1 authentication-service AS_ALL_LINES

    registration outbound
      registrar 10.0.0.43 5060
      lifetime 300
      register auto

context sip-gateway GW_SIP_0

  interface LAN
    bind interface IF_IP_LAN context router port 5060

context sip-gateway GW_SIP_0
  bind location-service LS_10000
  no shutdown

port ethernet 0 0
  medium 10 half
  encapsulation ip
  bind interface IF_IP_LAN router
  no shutdown

port bri 0 0
  clock auto
  encapsulation q921

  q921
    protocol pp
    uni-side auto
    encapsulation q931

    q931
      protocol dss1
      uni-side user
      bchan-number-order ascending
      encapsulation cc-isdn
      bind interface IF_ISDN_0 switch

port bri 0 0
  no shutdown


Ecco il TRUNK lato FreePBX

allow=g729

qualify=yes


type=friend


port=5060


username=10000


fromuser=10000


secret=2hbzl36


host=dynamic


defaultip=10.0.0.150


context=from-pstn